National Instruments 800 Series - Manual (Page 54)

Appendix D Front Panel and Connectors
© National Instruments Corporation D-3 VXIpc 800 Series User Manual
Keyboard and Mouse
Figure D-2 shows the location and pinouts for the keyboard and mouse
connectors on the VXIpc 800 Series. Table D-1 gives the name and
description for the keyboard and mouse connector signals.
Amp manufactures a mating connector with part numbers 212437-4
(housing), 212435-7 (ferrule), and 66735-4 (pin contact).
Figure D-2. Keyboard and Mouse Connectors Location and Pinout
Table D-1. Keyboard and Mouse Connector Signals
Pin Signal Name Signal Description
1 DATA Data
2 NC Not Connected
3 GND Ground
4 +5V +5 volts
5 CLK Clock
6 NC Not Connected
Keyboard
Mouse
1
2
4
3 5
6
1
2
4
3 5
6
2
1