National Instruments 800 Series - Manual (Page 9)

© National Instruments Corporation ix VXIpc 800 Series User Manual
About
This
Manual
This manual contains instructions for installing and configuring the
National Instruments VXIpc 800 Series embedded computer kit. The
VXIpc 800 Series includes all the models of the VXIpc-800 embedded
computers.
Organization of This Manual
This manual is organized as follows:
• Chapter 1, Introduction, describes the VXIpc 800 Series of
embedded VXI computers, lists what you need to get started,
describes the hardware, and lists optional equipment and software.
• Chapter 2, Functional Overview, contains functional descriptions
of each major logic block on the VXIpc 800 Series embedded
computers.
• Chapter 3, VXIpc 800 Series Configuration and Installation,
contains the instructions to configure and install the VXIpc 800
Series embedded computer.
• Chapter 4, BIOS, contains information on BIOS, the low-level
interface between the hardware and PC software that configures
and tests your hardware at boot up.
• Appendix A, Specifications, describes the environmental,
electrical, and mechanical specifications of the VXIpc 800 Series
embedded computer.
• Appendix B, VXIpc 800 Series System Resources, describes what
system resources are available on the VXIpc 800 Series and where
they are allocated.
• Appendix C, LED Indicators, describes how to read the LEDs on
the front panel to interpret the status of the VXIpc 800 Series.
• Appendix D, Front Panel and Connectors, describes the front
panel and connectors on the VXIpc 800 Series.