National Instruments 800 Series - Manual (Page 57)

Appendix D Front Panel and Connectors
VXIpc 800 Series User Manual D-6 © National Instruments Corporation
COM1 and COM2
Figure D-5 shows the location and pinouts for the COM1 and COM2
connectors on the VXIpc 800. Table D-4 gives the name and description
for the COM1 and COM2 connector signals.
ITT Cannon manufactures a serial port mating connector, part number
MDSM-9SC-Z11, for the COM1 and COM2 connectors on the
VXIpc-800.
Table D-3. Ethernet Connector Signals
Pin Signal Description
1 Differential Transmit
2 Differential Transmit
3 Differential Receive
4 NC
5 NC
6 Differential Receive
7 NC
8 NC