NEC PD78058FY(A) - Manual (Page 339)

339
CHAPTER 17 SERIAL INTERFACE CHANNEL 0 (
µ
PD78058FY SUBSERIES)
(4) I 2 C (Inter IC) bus mode (MSB-first)
This mode is used for 8-bit data transfer with two or more devices using two lines of serial clock (SCL) and
serial data bus (SDA0 or SDA1).
This mode is in compliance with the I 2 C bus format. In this mode, the transmitter outputs three kinds of data
onto the serial data bus: “start condition”, “data”, and “stop condition”, to be actually sent or received. The
receiver automatically distinguishes the received data into “start condition”, “data”, or “stop condition”, by
hardware.
Figure 17-1. Serial Bus Configuration Example Using I 2 C Bus
Master CPU
SCL
SDA0 (SDA1)
SCL
SDA0 (SDA1)
Slave CPU1
Slave CPU2
Slave CPUn
AV
DD AV
DD
SCL
SDA0 (SDA1)
SCL
SDA0 (SDA1)