NEC PD78058FY(A) - Manual (Page 479)

479
CHAPTER 21 INTERRUPT AND TEST FUNCTIONS
Table 21-1. Interrupt Source List (2/2)
Interrupt Source
Name Trigger
INTTM3 Reference time interval signal from Internal 001EH (B)
watch timer
INTTM00 Generation of 16-bit timer register, 0020H
capture/compare register (CR00)
match signal
INTTM01 Generation of 16-bit timer register, 0022H
capture/compare register (CR01)
match signal
INTTM1 Generation of 8-bit timer/event 0024H
counter 1 match signal
INTTM2 Generation of 8 bit timer/event 0026H
counter 2 match signal
18 INTAD End of A/D converter conversion 0028H
Software — BRK BRK instruction execution — 003EH (E)
Interrupt
Type
Default
Priority Internal/
External
Vector
Table
Address
Basic
Configuration
Type
Note 1 Note 2
14
17
13
Notes 1. Default priorities are intended for two or more simultaneously generated maskable interrupts. 0 is the
highest priority and 18 is the lowest priority.
2. Basic configuration types (A) to (E) correspond to (A) to (E) of Figure 21-1.
16
Maskable 15