Chapter 3: connecting the router, 1 system requirements, 2 installation environment requirements – NetComm NB504 User Manual
Page 10
����4
��e�� ����e
YML864Rev1
1�
www.netcomm.com.a�
ChAPteR 3: CoNNeCtING the RoUteR
3.1 system Requirements
•
Broadband Internet Access Service (DSL/Cable/Ethernet)
•
One DSL/Cable modem that has an RJ45 connector
•
Each PC in the LAN needs a working Ethernet Adapter and an Ethernet cable with RJ45 connectors
•
TCP/IP protocol must be installed on each PC
•
Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later
3.2 Installation environment Requirements
•
Do not place in direct sunlight or near a heater or heating vent
•
Do not cluttered or crowded. There should be at least 2 inches (5 cm) of clear space on all sides of the
router
•
Well ventilated (especially if it is in a closet)
•
Operating temperature: 0
o
C~40
o
C (32
o
F~104
o
F)
•
Operating Humidity: 10%~90%RH, Non-condensing