NetComm NB504 User Manual
Page 77
YML864 Rev1
����4 ��e�� ����e
����4 ��e�� ����e
www.netcomm.com.a�
5.12.8 statistics
The Statistics page (shown in figure 5-60) displays the network traffic of each PC in LAN, including total
traffic and traffic of the last Packets Statistic interval seconds.
Figure 5-60 Statistics
•
Current Statistics Status - Enable or Disable. The default value is disabled. To enable, click the Enable
button. If disabled, the function of DoS protection in Security settings will be ineffective.
•
Packets Statistics Interval - The default value is 10. Select a value between 5 and 60 seconds in the pull-
down list. The Packets Statistic interval indicates the time section of the packets statistic.
•
Sorted Rules - Select sorted rule of statistics results as your desired.
statistics table:
IP Address
The IP Address displayed with statistics
total
Packets
The total amount of packets received and transmitted by the router.
Bytes
The total amount of bytes received and transmitted by the router.
Current
Packets
The total amount of packets received and transmitted in the last Packets
Statistic interval seconds.
Bytes
The total amount of bytes received and transmitted in the last Packets
Statistic interval seconds.
ICMP Tx
The total amount of the ICMP packets transmitted to WAN in the last
Packets Statistic interval seconds.
UDP Tx
The total amount of the UDP packets transmitted to WAN in the last
Packets Statistic interval seconds.
TCP SYN Tx
The total amount of the TCP SYN packets transmitted to WAN in the last
Packets Statistic interval seconds.
Click the Save button to save the Packets Statistic interval value.
Click the Auto-refresh checkbox to refresh automatically.
Click the Refresh button to refresh immediately.