NetComm NB504 - Manual (Page 31)

YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e
www.netcomm.com.a� 1
8. If you choose PPTP, you should enter the following parameters (figure 5-12):
Figure 5-12 PPTP Settings
• User Name/Password - Enter the User Name and Password provided by your ISP. These fields are
case-sensitive.
• Dynamic IP/ Static IP – Choose either as you are given by your ISP and enter the ISP’s IP address or
the domain name.
If you choose static IP and enter the domain name, you should also enter the DNS assigned by your
ISP. And click the Save button.
Click the Connect button to connect immediately, Click the Disconnect button to disconnect
immediately.
• Connect on Demand - You can configure the router to disconnect from your Internet connection
after a specified period of inactivity (
Max Idle Time). If your Internet connection has been terminated
due to inactivity, Connect on Demand enables the router to automatically re-establish your
connection as soon as you attempt to access the Internet again. If you wish to activate Connect on
Demand, click the radio button. If you want your Internet connection to remain active at all times,
enter “0” in the
Max Idle Time field. Otherwise, enter the number of minutes you want to have
elapsed before your Internet connection terminates.
Ca�t�on: Somet�me� the connect�on cannot be ���connecte� altho�gh yo� �pec�fy a t�me to Max I�le T�me, ��nce �ome appl�cat�on� a��e
v���t�ng the Inte��net cont�n�ally �n the backg��o�n�.