NetComm NB504 User Manual
Page 9
YML864 Rev1
����4 ��e�� ����e
����4 ��e�� ����e
www.netcomm.com.a�
2.3.2 the Rear Panel
The rear panel contains the following features. (View from left to right:)
•
AC power socket: only use the power adapter supplied with the NB504 54Mbps Wireless Router, use of a
different adapter may result in product damage.
•
Four 10/100Mbps RJ45 LAN ports for connecting the router to the local PCs
•
RJ45 WAN port for connecting the router to a cable, DSL modem, or Ethernet
•
Factory Default Reset button
•
There are two ways to reset the router’s factory defaults:
1)
Use the
Factory Defaults function on System Tools -> Factory Defaults page in the router’s Web-
based Utility.
2)
Use the Factory Default Reset button: First, turn off the router’s power. Second, press and hold
the default reset button then turn on the router’s power, until the System LED lights up (about 3
seconds). Last, release the reset button and wait for the router to reboot.
�ote: En����e the ��o�te�� �� powe��e� on befo��e �t ��e�ta��t� completely.
•
Wireless antenna