NetComm NB504 User Manual
Page 28
Advertising
����4
��e�� ����e
YML864Rev1
8
www.netcomm.com.a�
5.
If you choose
802.1X + Static IP, you should enter the follow parameters(figure 5-9) :
Figure 5-9 802.1X + Static IP Settings
•
User Name - Enter the user name for 802.1X authentication provided by your ISP
•
Password - Enter the password for 802.1X authentication provided by your ISP.
Click
Login to start 802.1X authentication.
Click
Logout to end 802.1X authentication.
•
IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.
•
Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP.
•
Default Gateway - (Optional) Enter the default gateway IP address in dotted-decimal notation
provided by your ISP.
Advertising