NetComm NB504 User Manual
Page 84
����4
��e�� ����e
YML864Rev1
84
www.netcomm.com.a�
2. Configure tCP/IP for your computer
1)
On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.
2)
Double-click the Network icon, highlight the bound TCP/IP tab in the appearing Network window that
appears. An example is shown in the following figure:
Figure B-3 Configuration tab
3)
Click on Properties. The following TCP/IP Properties window will display and the IP Address tab is
open on this window by default.
4)
Now you have two ways to configure the TCP/IP protocol below:
•
Assigned by DHCP Sever
a.
Select Obtain an IP address automatically, as shown in the figure below:
Figure B-4 IP Address tab
b.
Do not type anything into the New gateway field on the Gateway tab.