NetComm NB504 - Manual (Page 56)

����4 ��e�� ����e YML864Rev1
�6 www.netcomm.com.a�
7. Pass - Select either Allow or Deny through the router.
8. Status - Select Enabled or Disabled for this entry on the Status pull-down list.
9. Click the Save button to save this entry.
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable All button to make all entries enabled
Click the Disabled All button to make all entries disabled.
Click the Delete All button to delete all entries
You can change the entry’s order as desired. Fore entries are before hind entries. Enter the ID number in the first
box you want to move and another ID number in second box you want to move to, and then click the
Move button to
change the entry’s order.
Click the Next button to the next page and click the Previous button to return to the previous page.
For example: If you desire to block E-mail received and sent by the IP Address 192.168.1.7 on your local network, and
to make the PC with IP Address 192.168.1.8 unable to visit the website of IP Address 202.96.134.12, while other PCs
have no limit you should specify the following IP address filtering list: