NetComm NB504 - Manual (Page 57)

YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e
www.netcomm.com.a� �
5.8.3 Domain Filtering
The Domain Filtering page (shown in figure 5-35) allows you to control access to certain websites on the
Internet by specifying their domains or key words.
Figure 5-35 Domain Filtering
Before adding a Domain Filtering entry, you must ensure that Enable Firewall and Enable Domain Filtering
have been selected on the Firewall page. To Add a Domain filtering entry, click the Add New… button. The
page “ Add or Modify a Domain Filtering entry “ will appear, shown in figure 5-36:
Figure 5-36 Add or Modify a Domain Filtering entry
To add or modify a Domain Filtering entry, follow these instructions:
1. Effective Time - Enter a range of time in HHMM format specifying the time for the entry to take effect.
For example, if you enter: 0803 - 1705, than the entry will take effect from 08:03 to 17:05.
2. Domain Name - Type the domain or key word as desired in the field. A blank in the domain field means
all websites on the Internet. For example: www.xxyy.com.cn, .net.
3. Status - Select Enabled or Disabled for this entry on the Status pull-down list.
4. Click the Save button to save this entry.