NetComm NB504 - Manual (Page 75)

YML864 Rev1 ����4 ��e�� ����e ����4 ��e�� ����e
www.netcomm.com.a� �
5.12.5 Reboot
This page (shown in figure 5-57) allows you to reboot the router.
Figure 5-57 Reboot the router
Click the Reboot button to reboot the router.
Some settings of the router will take effect only after rebooting, which include:
• Change LAN IP Address. (System will reboot automatically)
• MAC Clone (system will reboot automatically)
• DHCP service function.
• Static address assignment of DHCP server.
• Web Service Port of the router.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router’s settings to factory default (system will reboot automatically).
5.12.6 Password
This page (shown in figure 5-58) allows you to change the factory default user name and password of the
router.
Figure 5-58 Password
It is recommended strongly that you change the factory default user name and password of the router. All
users who try to access the router’s web-based utility or Quick Setup will be prompted for the router’s user
name and password.
�ote: The new ��e�� name an� pa��wo��� m��t not excee� 14 cha��acte��� �n length an� m��t not �ncl��e any �pace�. Ente�� the new
Pa��wo��� tw�ce to confi��m �t.
Click the Save button when finished.
Click the Clear All button to clear all.