End of activity 3-1 – National Instruments BridgeVIEW User Manual
Page 101
Advertising
Chapter 3
Tag Configuration
© National Instruments Corporation
3-43
The Tag Monitor is a quick way to look at tag values and alarm states
without building an HMI. It is also a great debugging tool. When you
launch the Tag Monitor, it automatically launches the Engine. The
Engine loads the last
.scf
file saved. In this case, it uses
mytanks.scf
. The Tag Monitor is shown in the following illustration.
13. Close the Tag Monitor.
End of Activity 3-1.
Advertising