National Instruments BridgeVIEW - Manual (Page 118)

Chapter 4 Human Machine Interface
BridgeVIEW User Manual 4-14 © National Instruments Corporation
4. Click on the Edit Mode button in the Control Editor toolbar. The
wrench changes to a pair of tweezers to illustrate that you are in
Customize mode. In Customize mode, the control is broken into
several parts. You cannot operate the control while the Control Editor
is in Customize mode.
5. Select Edit»Import Picture from File… from the Control Editor
menu bar. A file dialog box prompts you to select a picture file to open.
Open
boat1.wmf from the BridgeVIEW\Activity directory.
6. Pop up on the pointer of the slide and select Import Picture. The boat
image is imported onto the triangular pointer of the slide, as shown in
the following illustration.