National Instruments BridgeVIEW - Manual (Page 312)

Chapter 15 Application Control
© National Instruments Corporation 15-7 BridgeVIEW User Manual
Not Function (Functions»Comparison)—The node inverts the
Boolean state of the While Loop.
5. Save the VI.
6. Build the block diagram of HMI#1, as shown in the following
illustration.
7. Save HMI#1.vi Save a copy of this VI as HMI#2.vi in the
BridgeVIEW\Activity directory.
8. Close HMI#1.vi and HMI#2.vi .
9. Run VI Control2.vi . Make sure that you have entered the correct
path in the VI path to HMI#1.vi & HMI#2.vi section. Click on
the HMI#1 button. The front panel of HMI#1.vi appears. Now click
on the HMI#2 button. The front panel of HMI#2.vi appears.
10. Press the Shutdown button to close the front panels of HMI#1 and
HMI#2 and stop VI Control2.vi .
End of Activity 15-1.