National Instruments BridgeVIEW - Manual (Page 55)

Chapter 2 BridgeVIEW Environment
© National Instruments Corporation 2-21 BridgeVIEW User Manual
Figure 2-6. Status Details Dialog Box
With the Select Tags to Monitor dialog box, shown in Figure 2-7, you can
select which tags to monitor and configure how often to refresh the monitor
display. The Available Tags list box shows the tags not displayed in the Tag
Display Table. By default, the timeout is set to 1.00 second. This controls
how often the Tag Display Table is refreshed. By default, no tag is selected
to trigger a refresh of the Tag Display Table. You can select a tag to trigger
a refresh of the Tag Display Table from the Trigger Tag Ring. Then, the Tag
Display Table refreshes each time that tag is updated in the database, or
when the timeout interval elapses, whichever occurs first. Clicking on
Select Tags to Monitor is equal to selecting Tag Monitor»Select Tags….
Figure 2-7. Select Tags to Monitor Dialog Box