National Instruments BridgeVIEW - Manual (Page 113)

Chapter 4 Human Machine Interface
© National Instruments Corporation 4-9 BridgeVIEW User Manual
For this activity, you will use the tags configured in mytanks.scf , which
you edited in Activity 3-1 and is located in the BridgeVIEW\Activity
directory.
Note Before you can begin this activity, you must have completed Activity 3-1,
Configure a Tag, and View the Tag Configuration Parameters and Tag Values ,
in Chapter 3.
1. Place a real-time trend from the Controls»Graph subpalette on your
front panel. Pop up on the object and select Show»Label. Type
Real-Time Trend in the label.
2. Pop up on the trend and select HMI G Wizard….
3. Now you can select a list of tags to monitor. Select Mixer, and click on
Add, as shown in the following illustration.