National Instruments BridgeVIEW - Manual (Page 281)

Chapter 13 Front Panel Object Attributes
© National Instruments Corporation 13-3 BridgeVIEW User Manual
Activity 13-1. Use an Attribute Node
Your objective is to create a VI that indicates a high limit condition
using attribute nodes. You will use the Fill Color attribute of a
Tank indicator to indicate whether a randomly generated tank
level has gone above the user-defined limit.
Front Panel
1. Open a new front panel and create it as shown in the following
illustration.
2. Rescale the tank from 0.0 to 100.0 .
3. Set the default Limit Setting to 50.00 .
Block Diagram
4. Create the block diagram as shown below.