NETGEAR ProSafe SSL312 User Manual
Page 109
NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
Monitoring and Logging
8-7
v1.1, November 2006
a. To receive e-mail notification, enter your full e-mail address ([email protected]) in
the E-mail Event Logs to field. The event log file will be e-mailed to the specified
e-mail address before the event log is cleared. If this field is left blank, log files will not be
e-mailed.
b. To receive alert messages via e-mail, enter your full e-mail address
([email protected]) or an e-mail pager address in the E-mail Alerts to field. An
e-mail will be sent to the e-mail address specified if an alert event occurs.
c.
Enter the name or IP address of your mail server in the Mail Server field to e-mail log files
or alert messages. If this field is left blank, log files and alert messages will not be
e-mailed.
d. Enter the e-mail address that log and alert messages will be e-mailed from in the Mail
From Address field.
e.
Configure how frequently log files will be e-mailed and cleared in the Send Event Logs
field. If When Full is selected, the event log will be e-mailed and then cleared when the
log file is full. If Daily or Weekly options are selected, then
•
The log file will be e-mailed and deleted on a daily or weekly basis.
•
The log file will still be cleared if the log file is full before the end of the period.
f.
From the Send Event Logs pull-down menu, select a schedule for sending Event Logs.
You can also manually clear the Event Logs by clicking Clear Log.
5. In the Log and Alert Categories section, define the priority level of events that will generate
Syslog Messages, Event Logs and Alert messages from the Syslog Messages, Event Log and
Alerts pull-down menus.
Log categories are organized from most to least critical. Once a category is selected, then all
events equal to or more critical than the selected log category and will be logged. The default
Log and Alert levels are:
•
Syslog Messages: Debug
•
Event Log: Debug
•
Alerts: Error
6. Click Apply to confirm your settings.