NETGEAR ProSafe SSL312 - Manual (Page 62)

NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
4-16 Setting Up User and Group Access Policies
v1.1, November 2006
If the selected group is in a domain that uses internal database authentication, such as the
default “geardomain” domain, then the following window displays:
5. In the Password field, enter the user’s password.
6. In the Confirm Password field, re-enter the password.
7. From the User Type pull-down menu, select the user type (either User or Administrator).
8. Click Apply to update the configuration. Once the user has been added, the new user appears
in the table in the Users and Groups menu.
Editing a User
To edit a user:
1. In the Users table in the Users and Groups menu, click the name of the user. The User Settings
menu displays as shown in Figure 4-13 .
• The Edit User Settings section shows the User Name, Group Name, and Domain Name.
These fields are not configurable. To modify information supplied in these fields, remove
the user by clicking Delete User and then recreate the user with the correct information.
• If the user authenticates to an external authentication server, then the User Type and
Password fields are not shown. The password fields are not configurable because the
authentication server will validate the password. The user type is not configurable because
the SSL VPN Concentrator only allows users who authenticate to the internal user
database to have administrative privileges.
Figure 4-12
Note: Both the user name and password are case-sensitive.