NETGEAR ProSafe SSL312 - Manual (Page 66)

NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
4-20 Setting Up User and Group Access Policies
v1.1, November 2006
Deleting a User
To delete a user:
1. Click the Delete link adjacent to the users name in the Users table. The user is removed from
the table in the Users and Groups menu, or
2. Click the user name that you wish to remove. The Edit User Settings window will display.
3. In the Edit User Settings window, click Delete User. Once deleted, the user no longer appears
in the table in the Users and Groups menu.
Using Network Resource Objects to Simplify Policies
Network Resources are groups of host names, IP addresses and IP address ranges. By defining
resource objects, you can more quickly create and configure network policies. This is because you
will not need to redefine the same set of IP addresses or address ranges when configuring the same
access policies for multiple users.
Defining Network Resources is optional; smaller organizations can choose to create access
policies using individual IP addresses or IP networks rather than predefined Network Resources.
But for most organizations, it is recommended that you use Network Resources. If your server or
network configuration changes, by using Network Resources you can perform an update quickly
instead of individually updating all of the user and group policies.
To define a network resource:
1. Under the Access Administration menu on the left navigation pane, select Network Resources.
The Network Resources screen displays.
Note: A user cannot be deleted if the user is the only user defined with administrative
privileges.
Figure 4-16