NETGEAR ProSafe SSL312 - Manual (Page 58)

NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
4-12 Setting Up User and Group Access Policies
v1.1, November 2006
.
2. In the Bookmark Name field, enter a descriptive name.
3. In the Name or IP Address field, enter the domain name or the IP address of a host machine on
the LAN.
4. From the Service pull-down menu, select the service type.
5. If Terminal Services (RDP5) is selected, select the screen size that the bookmark will use from
the Screen Size drop-down menu.)
6. Click Apply to update the configuration. Once the configuration has been updated, the new
group bookmark will be displayed on the Group Settings window. in the Group Bookmarks
table.
Deleting a Group
To delete a group that is the default group for an authentication domain, delete the corresponding
domain (you cannot delete the group in the Group Settings menu).
If a group is not the default group for an authentication domain, first delete all users in the group.
Then you can delete the group on the Group Settings page using the following steps.
To delete a group:
1. Click the name of the group that you wish to remove from the Groups table. The Group
Settings menu displays.
Figure 4-9