NETGEAR ProSafe SSL312 - Manual (Page 61)

NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
Setting Up User and Group Access Policies 4-15
v1.1, November 2006
1. In the Users and Groups menu, click Add User. An Add User menu displays.
2. In the User Name field, enter the user name for the user. This is the name the user will enter in
order to log into the SSL VPN portal.
3. From the Group pull-down menu, select the name of the group to which the user belongs.
4. Click Apply.
If the selected group is in a domain that uses external authentication, such as Active Directory,
RADIUS, NT Domain or LDAP, then the Add User menu will close and the new user will be
added to the Users and Groups table.
It is only necessary to enter RADIUS, LDAP, NT and Active Directory user names if you wish
to define specific policies or bookmarks per user. If users are not defined in the SSL VPN
Concentrator, then global policies and bookmarks will apply to users authenticating to an
external authentication server.
Figure 4-11
Note: Groups configured to use Radius, LDAP, NT Domain or Active Directory
authentication do not require passwords because the external authentication
server will validate user names and passwords.