NETGEAR ProSafe SSL312 - Manual (Page 68)

NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
4-22 Setting Up User and Group Access Policies
v1.1, November 2006
.
2. From the Object Type pull-down menu under Add Resource Addresses, select either IP
Address or IP Network:
• If you selected IP Address, enter an IP address or fully qualified domain name in the IP
Address/Name field.
• If you selected IP Network, enter the IP network address in the Network Address field.
Enter the mask length in the Mask Length (0-31) field.
3. Click Add Resource to add the IP address or IP network to the Network Resource. The new
configuration appears in the Defined Resource Addresses table, as shown in the example
below.
Figure 4-19