Trunk to trunk connection, Call disconnect – Nortel Networks 1000 User Manual

Page 916

Advertising
background image

916

NTCK16 Generic Central Office Trunk cards

Trunk to Trunk connection

When any disconnect supervision is configured (CLS = BAT, BTS), the
Loop Start Trunk of the Generic XFCOT is marked as having disconnect
supervision and therefore follows the same rules as a Ground Start Trunk.

There is no configuration involved for this operation.

Call disconnect

If any disconnect supervision is configured (CLS = BAT, BTS), the Loop
Start Trunk is released when the disconnect signal is received. This
applies also in call states such as ringing, camp-on, and DISA.

There is no configuration involved for this operation.

Nortel Communication Server 1000

Circuit Card Reference

NN43001-311

02.06

Standard

27 August 2008

Copyright © 2003-2008 Nortel Networks

.

Advertising