N-Tron Ntron 7014FX2 - Manual (Page 108)

6/28/2007 page 108 of 145
Show port statistics
Command Name port show stats
Description This command is used to get the port statistics of a given port for all
available counters.
Syntax port show stats <port-no>
Parameters port-no
Port number. (1 ~ 14).
Examples N-TRON/Admin#[1]> port show stats 5
--------------------------------------------
COUNTER TYPE :[]
--------------------------------------------
COUNTER NAME COUNTER VALUE
--------------------------------------------
byteFrames 28072
64 byte Frames 272
64-127 byte Frames 24
128-255 byte Frames 43
256-511 byte Frames 43
512-1023 byte Frames 0
1024-1518 byte Frames 0
1519-1522 byte Frames 0
… … … …
NOTES Check whether port-no is in the valid range. (1 ~ 14)
Get total number of good frames received
Command Name port get totalgoodframes
Description Gets the total number of good frames received on the switch.
Syntax port get totalgoodframes
Parameters None
Examples eg.1
N-TRON/Admin#[1]> port get totalgoodframes
Total no of good frames: [12456]
eg.2
N-TRON/Admin#[1]> port get totalgoodframes
Total no of good frames: [56732]
NOTES
Get port speed
Command Name port get speed
Description Gets the port speed in megabits.
Syntax port get speed <port-no>
Parameters port-no
Port number. (1 ~ 14).
Examples N-TRON/Admin#[1]> port get speed 4
port speed of port no [4] is : [10]
N-TRON/Admin#[2]> port get speed 5
port speed of port no [5] is : [100]
NOTES Check whether port-no is in the valid range. (1 ~ 14)