N-Tron Ntron 7014FX2 - Manual (Page 128)

6/28/2007 page 128 of 145
N-Ring Related Commands
N-Ring get agingtime
Command Name n-ring get agingtime
Description To display the N-Ring Agingtime of the device
Syntax n-ring get agingtime
Parameters None
Example N-TRON/Admin#[1]> n-ring get agingtime
N-Ring Aging Time : 20
NOTES Default: 20 seconds and is separate from the Bridging Aging Time.
N-Ring Aging time is used for the whole switch if the switch is an
N-Ring Manager or becomes an active N-Ring Member.
N-Ring set agingtime
Command Name n-ring set agingtime
Description Sets the aging time for dynamically learned MAC addresses of the chipset
when in N-Ring Manager or Active N-Ring Member modes.
Syntax n-ring set agingtime <aging-time>
Parameters aging-time
aging time to be set for N-Ring.
Minimum N-Ring agingtime can be 5 seconds.
Default N-Ring aging time is 20 seconds.
Maximum aging time is 1000000 seconds.
Examples N-TRON/Admin#[1]> n-ring set agingtime 200
NOTES Is separate from the Bridging Aging Time. N-Ring Aging time is used for
the whole switch if the switch is an N-Ring Manager or becomes an active
N-Ring Member.
N-Ring get webfault
Command Name n-ring get webfault
Description To display the browser N-Ring fault reporting mode.
Syntax n-ring get webfault
Parameters None
Example N-TRON/Admin#[1]> n-ring get webfault
N-Ring faults will be shown on N-Ring Web Pages only
NOTES
N-Ring set webfault
Command Name n-ring set webfault
Description Sets the browser N-Ring fault reporting mode.
Syntax n-ring set webfault <ring|all>
Parameters Ring or all
Examples N-TRON/Admin#[1]> n-ring set webfault all
N-Ring faults will be shown on All Web Pages
NOTES
N-Ring get interval
Command Name n-ring get interval
Description To display the Self-Health Packet interval and missed threshold.
Syntax n-ring get interval
Parameters None
Example N-TRON/Admin#[1]> n-ring get interval
Self Health Packet interval is 1
Maximum Missed Packets is 2
NOTES Default: interval=1, missed=2