N-Tron Ntron 7014FX2 - Manual (Page 43)

6/28/2007 page 43 of 145
Bridging – Unicast Addresses
The Unicast Addresses tab under the Bridging category will display a list of MAC addresses that are
associated with each respective port number. This can be used to statically assign a MAC address access to
a single port on the switch.
Following the Add button on the page above, the administrator must enter a valid MAC address and
associate it with a port number on the switch. Once the administrator hits the Update button the changes
will take effect instantly.
Once a static MAC address has been added, it will be displayed in a list on the main page under Unicast
MACs tab.