N-Tron Ntron 7014FX2 User Manual
Page 48
Advertising
6/28/2007 page 48 of 145
RSTP Configuration, Continued…
Following the link for the view RSTP Port Configuration at VLAN# the administrator or user can see the
current RSTP status of the ports on that VLAN. This will show information such as the Path Cost and the
Port State. If the switch sees a redundant path it will put the port with the highest Path Cost into Blocking
mode where it will discard packets coming in on that port. In the below example, P12 is a redundant port
with port P2, therefore P2 is forwarding and P12 is discarding.
Advertising