N-Tron Ntron 7014FX2 - Manual (Page 127)

6/28/2007 page 127 of 145
Show IGMP rfilter mode
Command Name igmp show rfilter
Description The igmp show rfilter command is used to display the rfilter status by
port(s).
Syntax Usage: igmp show rfilter <all|port-list>
Parameters port-list|all
Enter a specific port number list or specify all ports
Examples N-TRON/Admin#[22]> Igmp show rfilter all
N-TRON/Admin#[22]igmp/show> igmp show rfilter 5
Port No. IGMP RFilter
----------------------------
5 DISABLE
N-TRON/Admin#[6]igmp/show> igmp show rfilter 5-7
Port No. IGMP RFilter
----------------------------
5 DISABLE
6 DISABLE
7 DISABLE
N-TRON/Admin#[7]igmp/show>
NOTES Default: enable
Set IGMP rfilter mode
Command Name igmp set rfilter
Description The igmp set rfilter command is used to enable or disable rfilter based on a
port-range.
Syntax Usage: igmp set rfilter <enable|disable> <port-list|all>
Parameters enable|disable
Enable or Disable the filter on the a specified port.
port-list|all
Enter a specific port number list or specify all ports
Examples N-TRON/Admin#[35]igmp/set> igmp set rfilter enable 5
IGMP RFilter enabled for port 5.
N-TRON/Admin#[36]igmp/set>
NOTES Default: enable