Cp3 bt26 – National CP3BT26 User Manual
Page 129
129
www.national.com
CP3
BT26
Table 52
Buffer Status Section of the CNSTAT Register
ST3 (DIR)
ST2
ST1
ST0 (BUSY)
Buffer Status
0
0
0
0
RX_NOT_ACTIVE
0
0
0
1
Reserved for RX_BUSY. (This condition indicates that soft-
ware wrote RX_NOT_ACTIVE to a buffer when the data
copy process is still active.)
0
0
1
0
RX_READY
0
0
1
1
RX_BUSY0 (Indicates data is being copied for the first time
RX_READY
→
RX_BUSY0.)
0
1
0
0
RX_FULL
0
1
0
1
RX_BUSY1 (Indicates data is being copied for the second
time RX_FULL
→
RX_BUSY1.)
0
1
1
0
RX_OVERRUN
0
1
1
1
RX_BUSY2 (Indicates data is being copied for the third or
subsequent times RX_OVERRUN
→
RX_BUSY2.)
1
0
0
0
TX_NOT_ACTIVE
1
0
0
1
Reserved for TX_BUSY. (This state indicates that software
wrote TX_NOT_ACTIVE to a transmit buffer which is sched-
uled for transmission or is currently transmitting.)
1
1
0
0
TX_ONCE
1
1
0
1
TX_BUSY0 (Indicates that a buffer is scheduled for trans-
mission or is actively transmitting; it can be due to one of
two cases: a message is pending for transmission or is cur-
rently transmitting, or an automated answer is pending for
transmission or is currently transmitting.)
1
0
1
0
TX_RTR (Automatic response to a remote frame.)
1
0
1
1
Reserved for TX_BUSY1. (This condition does not occur.)
1
1
1
0
TX_ONCE_RTR (Changes to TX_RTR after transmission.)
1
1
1
1
TX_BUSY2 (Indicates that a buffer is scheduled for trans-
mission or is actively transmitting; it can be due to one of
two cases: a message is pending for transmission or is cur-
rently transmitting, or an automated answer is pending for
transmission or is currently transmitting.)