National Instruments PXI-6561/6562 - Manual (Page 5)

© National Instruments Corporation 5 NI Digital Waveform Generator/Analyzer Guide
• Windows 2000/NT/XP, with all available critical updates and service
packs
• One of the following application development environments (ADEs):
– LabVIEW 7.0 or later (LabVIEW 7.1 or later is required to use the
NI-HSDIO Express VIs)
– LabVIEW Real-Time Module 7.1
– LabWindows ™ /CVI ™ 6.0 or later
– Microsoft Visual C++ (MSVC) 6.0 or later
2. Unpacking
The NI digital waveform generator/analyzer ships in an antistatic package to
prevent electrostatic discharge (ESD). ESD can damage several components
on the device.
Caution Never touch the exposed pins of connectors.
To avoid ESD damage in handling the device, take the following precautions:
• Ground yourself with a grounding strap or by touching a grounded
object.
• Touch the antistatic package to a metal part of your computer chassis
before removing the device from the package.
Remove the device from the package and inspect it for loose components or
any other signs of damage. Notify NI if the device appears damaged in any
way. Do not install a damaged device in your computer or chassis.
Store the device in the antistatic package when the device is not in use.
3. Verifying the Kit Contents
Verify that the kit contains the following items:
❑
DVD-sized case, which contains the following items:
– NI-HSDIO (High-Speed Digital I/O) instrument driver software
CDs, which include the NI Digital Waveform Generator/Analyzer
Help
– NI Digital Waveform Generator/Analyzer Getting Started Guide
❑
NI digital waveform generator/analyzer
❑
Mounting screw (PCI devices only)