Numark Industries AXIS 9 User Manual

Page 2

Advertising
background image

CD PLAYER QUICK SETUP (ENGLISH)

1.

Make sure all items listed on the front of
this guide were in the box.

2.

READ SAFETY INSTRUCTION BOOKLET
BEFORE USING THE PRODUCT.

3.

Study this setup diagram.

4.

Place mixer in an appropriate position for
operation.

5.

Make sure all devices are turned off and all
faders and gain knobs are set to “zero”

6.

Connect all stereo input sources as
indicated in the diagram, your microphone,
and headphones

7.

Connect the stereo outputs to power

amplifier(s), tape decks, and/or other audio
sources.

8.

Plug all devices into AC power.

9.

Switch everything on in the following order.

audio input sources (i.e. turntables or
CD players)

mixer

last, any amplifiers or output devices

10. When turning off, always reverse this

operation by,

turning off amplifiers

mixer

last, any input devices

11. Go to

http://www.numark.com

for product

registration.

More information about this product may be

found at

http://www.numark.com






FEATURES:

1.

PLAY/STUTTER- To start the music from the

initial cue point.

2.

PAUSE- To pause the music.

3.

CUE- To move the music to the cue point

and preview the selection.

4.

JOG WHEEL-

a.

INNER TOUCH WHEEL- Used for

various functions such as cueing,
scratching, pitch bend, searching, and

effect control

b.

Outer Pitch Wheel - Used for

temporary pitch bend.

5.

LCD DISPLAY- Indicates all the functions,

as they are occurring, with the CD.

6.

OPEN/CLOSE- Pressing will open or close

the disc tray on the transport.

7.

SGL- To set play mode in single or

continuous play.

8.

TIME- Controls display indication of time

mode.

9.

PROGRAM- Used for setting track order and
various special commands.

10. TRACK SELECT/SEARCH-

a.

Rotation – selects tracks

b.

Pressing while rotating – selects

tracks +10

c.

Pressing once- Puts wheel in search
mode.

Advertising