Roland XV-5080. - Manual (Page 131)

131
Chapter 4 Creating Patches
Chap.4
Structure (Patch Structure)
These parameters can be set only for Four-Tone Patches.
PATCH Common Structure page
([PATCH] - [F3 (Struct)])
fig.04-011.e_70
Tone 1&2/Tone 3&4
Determines how Tone 1 and 2, or Tone 3 and 4 are connected.
Type (Structure Type)
Range: 1–10
fig.04-012.e
fig.04-013.e
fig.04-014.e
fig.04-015.e
fig.04-016.e
fig.04-017.e
fig.04-018.e
fig.04-019.e
fig.04-020.e
fig.04-021.e
The display will graphically show the selected Structure. The
displayed symbols have the following meanings.
W1 (WG1), W2 (WG2), F1 (TVF1), F2 (TVF2), A1 (TVA1), A2
(TVA2), B (booster), R (ring modulator)
* If you select a Tone while on the STRUCT page, the Tone
paired with the selected Tone will also be selected.
* If Type 2–10 is selected, turning off one Tone will cause the
TONE 1 (3)
TONE 2 (4)
TVA TVF WG
WG TVF TVA
TYPE 1
TONE 1 (3)
TONE 2 (4)
TVA TVF WG
WG TVF TVA
TYPE 2
TONE 1 (3)
TONE 2 (4)
TVA TVF WG
WG TVF TVA
B
TYPE 3
TONE 1 (3)
TONE 2 (4)
TVA TVF WG
WG TVF TVA
B
TYPE 4
TONE 1 (3)
TONE 2 (4)
TVA TVF WG
WG TVF TVA
R
TYPE 5
TONE 1 (3)
TONE 2 (4)
TVA TVF WG
WG TVF TVA
R
TYPE 6
TONE 1 (3)
TONE 2 (4)
TVA TVF WG
WG TVF TVA
R
TYPE 7
TONE 1 (3)
TONE 2 (4)
TVA TVF WG
WG TVF TVA
R
TYPE 8
TONE 1 (3)
TONE 2 (4)
TVA TVF WG
WG TVF TVA
R
TYPE 9
TONE 1 (3)
TONE 2 (4)
TVA TVF WG
WG TVF TVA
R
TYPE 10