Settings common to an entire rhythm set – Roland XV-5080. User Manual
Page 169
169
Chapter 6 Creating Rhythm Sets
Chap.6
Settings Common to an
Entire Rhythm Set
Setting Procedure:
1. Select the Rhythm Set you wish to use.
2. Press [F1 (Common)].
3. Use [
]/[
]/[
]/[
] to move the cursor to the
parameter you want to set.
4. Turn the VALUE dial or by press [INC]/[DEC], to select
the desired value.
* If you’ve made a mistake, simply press [UNDO]. The value of
the parameter will be restored to what it was when you first
positioned the cursor there.
5. Press [EXIT] to return to the RHYTHM PLAY page.
A “*” symbol will appear at the left of the Rhythm Set name,
indicating that the settings have been modified.
fig.06-002.e_70
* If you turn off the power or select another Rhythm Set while
the “*” symbol is displayed, your new Rhythm Set settings
will be lost. If you wish to keep these settings, perform the Save
operation. (p. 194)
RHYTHM Common page ([RHYTHM] -
[F1 (Common)])
fig.06-002a.e_70
Common
Name (Rhythm Name)
You can name a Rhythm Set using up to 12 characters.
Press [
] or [
] to move the cursor, and then create the
name by turning the VALUE dial or pressing the [INC] or
[DEC] buttons to select the desired characters.
Available characters/symbols:
space, A-Z, a-z, 0-9, ! " # $ % & ' ( ) * + , - . / : ; < = > ? @ [ \ ] ^
_ ` { | }
→ ←
* Pressing the VALUE dial displays the Patch Name window,
in which you can use the following functions.
[F2 (
←
Prev)]: Move back one character.
[F3 (Next
→
)]: Move forward one character.
[F4 (Insert)]: Insert a blank space at the cursor position.
[F5 (Delete)]: Delete the character at the cursor position.
[F6 (OK)]: Confirm the selected name.
Level (Rhythm Level)
Range:
0–127
Sets the volume of the Rhythm Set.
* You can specify the level for each using the Tone Level
Output Assign (Rhythm Output Assign)
Specifies the output destination of the entire Rhythm Set.
Available Settings:
MFX:
The Tone is sent into the Multi-effects.
OUTPUT A–D:
The Tone is sent to the selected pair of
OUTPUT A–D jacks.
INDIV 1–8:
The Tone is sent to the selected INDIVIDUAL 1–8
jack.
TONE:
Outputs according to the settings for each Rhythm
Tone.
Tempo
Clock Source (Rhythm Clock Source)
The M-FX changes and phrase loop (break beats) can be
synchronized to a clock, or tempo. The Clock Source setting
selects the timing reference to be used by the Rhythm Set.
Available Settings:
RHYTHM:
The Rhythm Set Tempo will be used.
SYSTEM:
The global System Tempo or clock messages
received from an external sequencer will be used.
Tempo (Rhythm Tempo)
Range:
20–250
When Clock Source (Rhythm Clock Source) is set to
“RHYTHM,” this setting value is effective.
* Clock messages for the Rhythm Tempo are not transmitted
from the MIDI OUT connector.
One Shot Mode
Switch (One Shot Mode Switch)
Range:
OFF/ON
This causes all the samples assigned to a selected Rhythm
Tone in Loop mode (p. 175) played all together (One Shot).
* This function cannot be used with internal waves, and waves
on Wave Expansion Boards.
* Loop mode settings cannot be changed for individual samples.