Roland XV-5080. - Manual (Page 241)

241
Appendices
Parameter List
■ Patch Parameters
PATCH Common General #1 ([PATCH]-[F1(Common)]-[F1(General)])(p. 127)
Group Parameter Value
Common Name Patch name ASCII Characters (max. 12)
Category Patch category (*1)
Patch Type Patch Type 4 TONES, MULTI-PARTIAL
Level Patch Level 0–127
Pan Patch Pan L64–0–63R
Output Assign Patch output assign MFX, OUTPUT A–D, INDIV 1–8, TONE
Octave & Tune Octave shift Octave shift -3–0–+3
Coarce Tune Coarce tune -48–+48
Fine Tune Fine tune -50–+50
Stretch Tune Depth Stretch tune depth OFF, 1, 2, 3
Analog Feel Analog feel depth 0–127
*1:NO ASSIGN, AC.PIANO, EL.PIANO, KEYBOARDS, BELL, MALLET, ORGAN, ACCORDION, HARMONICA, AC.GUITAR, EL.GUITAR, DIST.GUITAR, BASS,
SYNTH BASS, STRINGS, ORCHESTRA, HIT&STAB, WIND, FLUTE, AC.BRASS, SYNTH BRASS, SAX, HARD LEAD, SOFT LEAD, TECHNO SYNTH,
PULSATING, SYNTH FX, OTHER SYNTH, BRIGHT PAD, SOFT PAD, VOX, PLUCKED, ETHNIC, FRETTED, PERCUSSION, SOUND FX, BEAT&GROOVE,
DRUMS, COMBINATION
PATCH Common General #2 ([PATCH]-[F1(Common)]-[F1(General)])(p. 128)
Group Parameter Value
Modify Cutoff offset Patch cutoff offset -63–+63
Resonance offset Patch resonance offset -63–+63
Attack offset Patch attack time offset -63–+63
Release offset Patch release time offset -63–+63
Velo Sens offset Patch velocity sens -63–+63
Tempo Clock Source Patch clock source PATCH, SYSETEM
Tempo Patch tempo 20–250
Voice priority Mode Voice priority mode LAST, LOUDEST
One shot Mode Switch Switch OFF, ON
PATCH Common Control ([PATCH]-[F1(Common)]-[F2(Control)])(p. 129)
Group Parameter Value
Key Mode Key Assign Key assign mode POLY, MONO
Legato Switch Legato switch OFF, ON
Legato Retrigger Legato retrigger switch OFF, ON
Bender Bend Range Bend range up 0–+48
Bend range down -48–0
Portamento Switch Portament switch OFF, ON
Mode Portament mode NORMAL, LEGATO
Type Portament type RATE, TIME
Start Portament start pitch PITCH, NOTE
Time Portament time 0–127
PATCH Common Structure ([PATCH]-[F1(Common)]-[F3(Struct)])(p. 131)
Group Parameter Value
Tone 1 & 2 Type Structure type1&2, 3&4 1–10
Tone 3 & 4 Type Structure type1&2, 3&4 1–10
Booster Booster gain1&2, 3&4 0, +6, +12, +18 dB
PATCH Common TMT Key Range ([PATCH]-[F1(Common)]-[F4(K.Range)])(p. 132)
Group Parameter Value
F.L Key fade width lower 0–127
K.L Key range lower C-1–UPPER
K.U Key range upper LOWER–G9
F.U Key fade width upper 0–127