Roland XV-5080. - Manual (Page 188)

188
Chapter 7 Loading a Variety of Data
About the Display of Folder
Categories in Sampler Libraries
S-700 Series files have the category indicated.
The following categories can be selected.
• other: No Assign
• BEL: Bell(Bell, Bell Pad)
• BRS: Brass(Synth Brass)
• BS : Bass(Acoustic Bass, Electric Bass)
• BTS: Beats(Beat, Groove)
• CMB: Combination(Splitted/Layerd Patch)
• CYM: Cymbals
• DRM: Drums
• FLT: Flute
• GTR: Guitar(Acoustic Guitar, Electric uitar
• HAT: Hi Hats
• HIT: Hits(Orchestra Hit)
• KEY: Keyboards
• KIK: Kick Drums
• KIT: Drum Kits
• MLT: Mallets
• ORC: Symphony Orchestra
• ORG: Organ(Electric Organ, Pipe Organ)
• PAD: Synth Pads(Pad Synth)
• PNO: Piano(Acoustic Piano)
• PRC: Percussion
• SAX: Saxophones
• SFX: Sound Effects
• SNR: Snare Drum
• STR: Strings
• TOM: Toms
• VOX: Voices(Vox, Choir)
• WND: Winds
In addition to the S-700 Series, there is also the following.
SVD: (XV-5080's settings files)
• AIFF: AIFF file
• WAV: WAV file
• AS: AKAI sample
• AP: AKAI patch
Sample Load
All samples (wave data) stored on the memory card are
loaded to the XV-5080’s SIMM. When switching to a memory
card containing Patches or Performances that use samples,
the samples in the card are used after being loaded to the
SIMM.
* Patches and Performances may not sound properly if samples
in the inserted card are not loaded to the SIMM.
fig.07-02.e_70
1. Press [DISK], getting the indicator to light.
2. Press [F3 (SampLd)].
3. A message asking you if you want to overwrite the
Partials and Samples in the SIMM appears.
4. Press [F6 (Load)] to begin loading the data.
Once the data has been loaded successfully, the display will
indicate “Completed!”
5. Press [DISK] to return to the previous page.
Free Area
SIMM
This displays the amount of free space in the SIMM.
Disk
This displays the free disk space remaining on the connected
SCSI device.
Total
This indicates the total size of the contents of the SIMM and
samples on the memory card.