Modifying tone settings – Roland XV-5080. User Manual

Page 218

Advertising

218

Chapter 10 Examples of Applications Using the XV-5080

MFX Control Destination

Selects the Multi-effects parameter to be controlled using the
MFX Control 1–4 source. The parameters that can be selected
depend on which type of Multi-effects is set to MFX Type.

Modifying Tone Settings

You can use the Matrix Control parameter to control Tone
settings in realtime.

Selecting the MIDI Messages Used for
Control and the Parameters to Be
Changed

1. Select the Patch you’re going to use.

2. Press [F5 (LFO&CTL)].

3. Press [F3 (Control)].

4. Press [

]/[

] to move the cursor to

the parameter you want to set.

5. Turn the VALUE dial, or press [INC]/[DEC] to select the

desired value.

* If you’ve made a mistake, simply press [UNDO]. The value of

the parameter will be restored to what it was when you first
positioned the cursor there.

6. Press [EXIT] to return to the PATCH PLAY page.

Matrix Control 1–4

Source (Matrix Control Source)

Assign one of the following controllers to Matrix Control
Source. If you wish to use a controller that will apply to all
Patches, or a controller that cannot be directly selected here,
select SYS-CTRL1–4, and then select the controller using the
System Control Source parameters (SYSTEM Control screen).

Available Settings:

OFF:

No controller is used.

CC01–CC95:

Controller numbers 1–95 (except for 32)

BENDER:

Bender

AFTERTOUCH:

Aftertouch

SYS-CTRL1:

System controller 1

SYS-CTRL2: