Ricoh AP305 - Manual (Page 117)

Replacing Consumables
87
6
❒ After pulling the tape out of the
cartridge, toner scatters easily.
Do not shake or give a shock to
the cartridge.
I
Close the left cover.
The “Add Toner” message clears
from the panel display and the
printer starts warming up. It takes
a few minutes.
Specifying the replacing toner cartridge
When several toner colors run out at
the same time, you can replace only
the specific toner cartridges. If you
don't have all indicated toners, you
should do this before following P.85
“Replacing the Toner Cartridge”.
The following procedure describes
how to replace the magenta toner car-
tridge. You can use the same proce-
dure to replace the toner cartridges
for the other toner colors as well.
A
Press
{{{{
Menu
}}}}.
The following message appears on
the panel display.
<Menu> j
IPDL-C Menu l
B
Use
{{{{U U U U}}}}{{{{T T T T}}}} to display "Mainte-
nance", and then press {{{{
Enter
}}}}.
<Menu> j
Maintenance l
The following message appears on
the panel display.
<Maintenance> j
1.Toner Selectl
C
After confirming that “1.Toner
Select” is on the display, press
{{{{
Enter
}}}}.
The following message appears on
the panel display.
<Toner Select> j
Black l
D
Use
{{{{U U U U}}}}{{{{T T T T}}}} to display "Magen-
ta”, and then press {{{{
Enter
}}}}.
The machine prepares itself for a
new toner cartridge. Prepare the
new toner cartridge for installa-
tion.
<Toner Select>
Please Wait
When the machine is ready, the
following message is displayed.
<Toner Select>
Add Toner
E
Replace the toner cartridge.
⇒ ⇒ ⇒ ⇒
P.85 “Replacing the Toner Car-
tridge”
Power Error Data In
Menu Media Enter
On Line Reset Escape
TFWS020E