Ricoh AP305 - Manual (Page 88)

Troubleshooting
58
6
Warming Up The printer is preparing for
printing. Wait until the printer is
warmed up.
The printer adjusts itself
regularly to maintain print
quality. (This message
might appear while print-
ing.) It is not an error message.
The printer is working
properly. Just wait a while.
Waste T Full
(on the lower line)
The waste toner bottle is
nearly full. Replace the waste toner
bottle.
⇒
P.92 “Replacing
the Waste Toner Bottle and
Charger”
Waste Toner is
Full
The waste toner bottle is
full. Replace the waste toner
bottle.
⇒
P.92 “Replacing
the Waste Toner Bottle and
Charger”
A3:Error Ther is too much data for
the I/O buffer to handle. Check if the interface cable
is inserted into the printer
and your computer secure-
ly.
Check if the interface cable
is not damaged or broken.
Increase the size of I/O
buffer.
⇒
P.103 “System
Menu”
A6:Error There is not enough printer
memory to print one or
more of the pages in the
print job. See P.114 “Low Memory”.
AB:Error The printer is unable to
process the data you are
trying to print. Install an optional memory
units (SIMM) to increase
printer memory capacity.
Reduce the amount of data
being sent to the printer.
Message Description Comments