Menu> j system menu l – Ricoh AP305 User Manual
Page 53
23
3. Configuring the Printer for the
Network with the Operation Panel
Configuring the Printer for the Network
with the Operation Panel
After installing the optional network
interface board, configure it for the
network using the printer's operation
panel.
Note
❒ If you want to print from your
Macintosh computer, the optional
RICOH-SCRIPT2 Type305 is re-
quired.
The following table shows the opera-
tion panel settings and their default
settings. These are included in the
”System Menu”.
A
Press
{{{{
Menu
}}}}.
B
Press
{{{{U
U
U
U}}}}{{{{T
T
T
T}}}} until the following
message appears.
<Menu> j
System Menu l
C
Press
{{{{
Enter
}}}}.
D
Select the protocol you want to
use. You can select one of items
on the table below.
•
' means that this protocol is ac-
tive.
• Blank cell means that this proto-
col is not active.
•
means that this protocol is
not supported.
*1
TCP/IP
*2
NetWare
*3
EtherTalk
*4
NetBEUI: NetBEUI appears on the
panel display, but it is not support-
ed.
Items
Default
32 IP Address
011.022.033.044
33 Subnet Mask
000.000.000.000
34 Gateway Add
(Gateway Address)
000.000.000.000
35 Access CTL.
(Access Control Address)
000.000.000.000
36 Access Mask
(Access Control Mask)
000.000.000.000
37 Net Boot
(Network Boot)
None
38 Frame NW
(Frame type NetWare)
Auto Select
39 Active PTL.
(Active Protocol)
All Active
Menu item on the
panel display
Active Protocol
TCP
NW
NB
All Active
(Default Setting)
'
'
'
None
TCP/IP Only
'
NetWare Only
'
TCP & NetWare
'
'
EtherTalk Only
'
TCP & EtherTalk
'
'
NetW & EtherTalk
'
'
TCP & NW & EtherTk
'
'
'
NetBEUI Only
TCP & NetBEUI
'
NetW & NetBEUI
'
TCP & NW & NB
'
'
ETalk & NetBEUI
'
TCP & ETK & NB
'
'
NW & ETK & NB
'
'