Ricoh AP305 - Manual (Page 90)

Troubleshooting
60
6
B6:Error An error has occurred in
the optional parallel inter-
face board. Turn off the printer's pow-
er switch. Remove and re-
install the optional parallel
interface board and turn on
the printer's power switch.
Then, try to print again.
B7: Error An error has occurred in
the optional network inter-
face board. Turn the printer's power
switch off and on. Then, try
to print again.
Turn off the printer's pow-
er switch. Reinstall the net-
work interface board and
turn on the printer's power
switch. Then, try to print
again.
Turn off the printer's pow-
er switch. Remove the net-
work interface board from
the printer and turn on the
printer's power switch.
Then, try to print again.
Note
❒ If you remove the net-
work interface board,
you cannot perform
your print job over the
network. You can send
your print job to the
printer only via a paral-
lel cable connection.
85:Error An error has occurred in
the printer's standard
memory. Turn off and on the print-
er's power switch.
86:Error You may be trying to print
with the wrong printer
driver. Make sure you are using
the correct printer driver.
You might not use the cor-
rect interface cable. Make sure you are using
the correct interface cable.
91:Error An error has occurred in
the printer's standard
memory. Turn off and on the print-
er's power switch.
Message Description Comments