Windows 95/98 – Ricoh AP305 User Manual
Page 61
Windows 95/98 - Installing the IPDL-C Printer Driver
31
4
Windows 95/98 - Installing the IPDL-C
Printer Driver
Preparation
Before starting installation, be sure to carefully read the README file that is
on the CD-ROM containing the printer driver.
Important
❒ Never have two versions of the same printer driver installed on your system
at the same time. When upgrading to a new version of the printer driver, de-
lete the old version, and then install the new one.
Normally you can use plug and play to install the printer driver. If your system
does not support plug and play, add the printer from the
[Printers]
window.
❖
❖
❖
❖
Plug and Play
Plug and play automatically makes the required software settings whenever
it detects that a new peripheral device has been connected to the computer.
Plug and play operates when the following conditions are present.
• The computer supports plug and play (see the computer's documentation
for details).
• The printer is connected to the computer by a bi-directional interface cable.
• Printer power is turned on first, and then the computer is turned on.
❖
❖
❖
❖
Printer Driver Installation
A
Read the README file.
B
Turn on the printer.
C
Turn on the computer.
D
Install the driver in accordance with the instructions that appear on your
computer screen.
• If the
[New Hardware Found]
dialog appears.
• If the
[Device Driver Wizard]
appears.
P.33 “Plug and Play Installation 2”
• If Windows 95/98 starts normally.