Installing the ricoh-script2 type305, P.13 – Ricoh AP305 User Manual

Page 43

Advertising
background image

Installing the RICOH-SCRIPT2 Type305

13

2

Installing the RICOH-SCRIPT2 Type305

R

CAUTION:

Important

❒ The RICOH-SCRIPT2 can be dam-

aged by small amounts of static
electricity. Before touching it,
touch something metal to remove
static electricity from you.

Note

❒ For this printer, use only RICOH-

SCRIPT2 Type305.

A

Check the contents of the box for
the following items.
• DIMM (Dual Inline Memory

Module)

• Installation Guide
• Operating Instructions

B

Turn off the printer's power
switch and remove all cables and
cords from the printer.

C

Remove screws and remove the
right back plate.

Note

❒ A coin can be used to remove

the screws.

D

Make sure that the notch in the
module is on the right side. Tilt
the module to 30 degrees from
perpendicular to the slot and
slide it into the slot (

A

A

A

A). Then

push it in until it makes an audi-
ble click as it pops into place (

B

B

B

B).

E

Attach the back plate to its origi-
nal position, and fasten it with
screws that were removed in step

CCCC.

Note

❒ A coin can be used to fasten the

screws.

F

Plug the printer's power cord
back into the printer and the wall
socket. Turn on the printer's pow-
er switch.

Make sure to turn off the printer
and wait for about 30 minutes
before installing options. Not
waiting for the printer to cool
down can result in a burn.

TFWX197E

TFWX200E

TFWX205E

Advertising