Ricoh AP305 - Manual (Page 79)

Loading Paper
49
5
Loading Paper
Loading Paper in the Paper
Tray
Use the following procedure to load
paper in the paper tray and optional
tray. See P.52 “Loading Paper in the By-
pass Tray” for details on the bypass
tray.
Important
❒ After you load paper, you must set
the paper size dial to match the ac-
tual paper size loaded in the tray.
Otherwise, the printer might be
damaged.
Reference
See P.43 “Paper and Other Media
Supported by this Printer” for details
on supported paper types and siz-
es.
A
Carefully pull the paper tray out
of the printer and place it on a flat
surface.
B
Slide the paper guides to posi-
tions that match the size of paper
you want to load.
Adjust the paper guides until they
click into position.
Important
❒ Do not touch the friction pad
(A). Otherwise, paper misfeeds
or paper multi-feeds might oc-
cur .
C
Load paper into the tray with the
print side up.
Important
❒ Make sure that the stack of pa-
per is no higher than the limit
mark (
TT) inside the tray.
❒ Make sure the paper fits under
the back paper guide.
TFWY090E
TFWY100E
TFWY110E