Ricoh AP305 - Manual (Page 33)

Guide to the Printer
3
1
Exterior-Rear View
1. Paper Exit Cover
Open this cover when removing misfed
paper at the fusing unit.
2. Ozone Filter
This filter reduces the amount of ozone
that is discharged into the air.
3. Ventilator
This hole allow air to circulate, prevent-
ing components inside the printer from
overheating.
Important
❒ Do not leave the ventilator ob-
structed or blocked. Doing so cre-
ates the danger of malfunction due
to overheating.
4. Parallel Interface Connector
Plug the interface cable that connects the
printer to your computer into this con-
nector.
Important
❒ Rating voltage of the parallel inter-
face connector for the computer;
Max. DC 5V.
5. Back Plates
Remove to install some options.
Important
❒ Rating voltage of the network in-
terface connector for the network;
Max. DC 5V.
❒ Rating voltage of the parallel inter-
face connector for the computer;
Max. DC 5V.
6. Ventilator
This hole allow air to circulate, prevent-
ing components inside the printer from
overheating.
Important
❒ Do not leave the ventilator ob-
structed or blocked. Doing so cre-
ates the danger of malfunction due
to overheating.
7. Power Connector
Connect the power cord to this connec-
tor.
TFWX040E
1 2
3
4
5 6 7