To change a file name, To set or change a password – Ricoh LDD280 User Manual
Page 117
Storing File
105
3
To change a file name
A
Press [Store File].
B
Press [File Name].
The File Name display appears.
C
Press [Delete All] to delete the old
file name.
Note
❒ You can also use [Backspace] to
delete unwanted characters.
D
Enter a new file name, and then
press [OK].
Reference
Note
❒ Up to 20 characters can be en-
tered as a file name, but only 16
characters of each file name will
be displayed in the file list.
To set or change a password
A
Press [Store File].
B
Press [Password].
C
Enter the password (four-digits)
using the number keys, and then
press [#].
D
Reenter the password (four-dig-
its) for verification, and then
press [#].
E
Press [OK].
Changing a Stored File's User
Name, File Name, or Password
A
Press [Select Stored File].
B
Select the file with the user name,
file name, or password you want
to change.
Note
❒ If a password has been set for
the file, enter the password and
press [OK].
C
Press [File Management].