Ricoh LDD280 - Manual (Page 133)

If you Cannot Make Clear Prints
121
4
If you Cannot Make Clear Prints
Faint Prints
If the machine is not used for a long period of time or you change the color drum
unit, the ink on the drum might dry causing print quality to deteriorate. To solve
this problem, use Quality Start mode. See p.98 “Quality Start”.
If the print density is still too light even if you use Quality Start mode, remake
the master.
Black Lines/Stained Prints
Check the exposure glass cover and clean it if dirty. See p.172 “Cleaning the ex-
posure glass cover”.
Check the exposure glass and clean it if dirty. See p.172 “Cleaning the Exposure
Glass”.
Check the sheet of the optional ADF and clean it if dirty. See p.173 “Cleaning the
Auto Document Feeder”.
Note
❒ If black lines or stains still appear on prints even following the cleaning pro-
cedures above, please contact your service representative.
Dirty Background
If the background of prints is dirty, the drum unit might be dirty.
R CAUTION:
R CAUTION:
R CAUTION:
R CAUTION:
• If ink comes into contact with your eyes, rinse immediately in running water.
For other symptoms, consult a doctor.
• Keep the ink or ink container out of reach of children.
• If ink is ingested, induce vomiting by drinking a strong saline solution. Con-
sult a doctor immediately.
• If your skin comes into contact with ink, wash the affected area thoroughly
with soap and water.